RW-4 Type 10W Marine Aquarium Wave Maker for Wireless Master/Slave Pump Control Tank | Pumps

RW-4 Type 10W Marine Aquarium Wave Maker for Wireless Master/Slave Pump Control Tank | Pumps

Brand NameNoneModel NumberRW4PowerElectricUsageOtherTheoryCentrifugal PumpStandard or NonstandardStandardStructureSingle-stage PumpPressureLow PressureFuelOtherApplicationOtherMeasurement unitpiece/piecesEach pack1

Unavailable in 

Description

Specification:

Power: 10W

Voltage: 110-240V 50/60HZ

Flow: 500-4000L/H adjustable

Size: long 8.6cm diameter 6.1cm

Wave length: 2.5 m

Controller to voltage swing plug length: 1.75 M

No separate transformer,

Transformer plug integral type

Features:

1, a unique control system, a variety of wave mode and function, the basic can meet the user's waveform;
2, low voltage DC variable frequency pump, to ensure that the user's personal safety;
3, simple operation panel, the realization of complex dynamic seawater function;
4, the direction of the flow can be adjusted with the need to adjust the angle;

5, 8 Different Flow Rate.

6, wide voltage input (50/60Hz AC100~240V), and can avoid the impact of voltage fluctuations on wave making.
 

Wave Mode:

W1:Wave Mode

Remoting the knob is necessary when operate this mode to adjust the wave patterns among one or more pumps at the same time. As the volum of water in tank is different from the capacity of the tank, wave period needed to be adjusted by switching the knob. The wave is biggest when wave length turn to be same as the length of tank; Increase the wave length by switching the knob in clockwise, and reduce in anti clockwise.

Tips: You should switch the knob gradually and notice the wave pattern in a certain period after each adjustment.Press "SPEED/FEED"to adjust the flow rate.

W2: Sine Mode   

 One or more pumps can operate at the same time in this mode. The power various between 30%-100% and the regulation looks like a sine curve.

Else: Random Mode

One or more pumps can operate at the same time. It is a random mode as the power of pump is changing to a random data all the time without regulation.

H:Flow Mode

One or more pumps can operate at the same time. In constant flow. Flow rate can be adjusted by "SPEED/FEED"

C: Shift to flow mode 

Two pumps are needed to be operated at the same time, when they shift wave and flow in cycles. P1 work, P2 stop;P2 work, P1 stop;P1 work, P2 stop. and cycles like this. Cycle period (1s-1min) can by adjusted by switching the knob and adjust the flow rate by pressing SPEED/FEED