1015 Lead CNC Machine Full kit 1000x1500mm - Silver

—————————————————————————————————————————————————————————

• Based on C-Beam, V-Slot, Xtreme Solid V-Wheels and TR8x8(P2) Lead screws it is strong, accurate and reliable.
• It has been designed to accurately cut foams, woods, plastics and aluminium to 0.05-0.10mm accuracy or better.
• Functional engineering parts, toys, signs or anything else that can be imagined, can be made on the Lead CNC Machine.
• The BULK-MAN 3D Kit has a couple of small differences from the design published by Mark Carew. Most notably are the use of Black Corner Connectorsin place of Cast Brackets in order to increase rigidity.

• Baseboard
• Endmills
• Power cord and
• Software
  
  

• Aluminum / Hard Wood / Soft Wood / Oak / Plexi Glass / Delrin / HDPE / Foam

This Full Kit Includes:c

• LEAD CNC Mechanical Kit

• 4 x Nema23 (2.45N.m) Stepper Motors

• Cable Drag Chain Bundle

• Wiring Cable Kit

• Controller Bundle based on GRBL or Mach3 / Drufel CNC Software

• CNC xPRO V5 (Highly Recommend)

• Maker Shield GRBL

• High Torque GRBL

• UC300 Mach3

• NVUM Mach3

• STB5100 Mach3

• Cooled Spindle Bundles for Choice

• 1.5KW Air 110V/220V

• 1.5KW Water 110V/220V

• 2.2KW Water 110V/220V

• All Extrusions are M5 Tapped as where it is necessary

Specs of High Torque Nema 23 Stepper Motor:

• NEMA 23

• Shaft Size: 1/4″

• Step Angle: 1.8

• Holding Torque: 2.45N.m

• Rated voltage:  3.6V

• Rated current:3A

Controller Bundle Options:cccccccccccccccccccccccccccccccccCCCCCCC

• CNC xPRO V5 Controller Bundle (We Recommend)
  

The xPRO V5 is the most advanced GRBL CNC Controller in the world. It runs off a 32bit processor with over 4x the processing power of most other GRBL controllers. The xPRO V5 is pre-assembled and pre-flashed with the latest GRBL version. We recommend the xPRO V5 as the best controller option available. The stepper drivers are easily suitable for our High Torque Stepper Motors and can even power stronger motors such as Nema34.

• 32bit processor
• High powered Trinamic 6A Stepper Drivers
• Supports VFD control
• Easy Plug and Play
• SD Card which allows for offline use
• Both Wi-Fi connection & USB connection (user choice)
• This option is the best choice for both a novice starting out, and with people with experience and technical knowledge.

This option is perfect for a CNC novice.

• Maker Shield GRBL Controller Bundle
  

The GRBL Standard Current system uses an Arduino Uno compatible board with an 8bit processor. The Maker Shield is installed onto the Uno. The Maker Shield is an upgrade to the CNC Shield and has 4 embedded DRV8825 drivers. Unlike a traditional CNC Shield the upgraded Maker Shield is compatible with the latest version of GRBL and has larger tracks on the board to allow for higher current stepper motors.

This option is suitable for if you have technical knowledge

• High Torque GRBL Controller Bundle
  

The GRBL High Current system uses an Arduino Nano with 8bit processor to control the CNC machine. This system uses external genuine TB6600 Stepper Drivers suitable for High Torque Stepper Motors. This system does require you to wire up all the components yourself and flash the Nano with GRBL. Because of this it is a very customisable system.

This option is suitable for if you have technical knowledge.

• NVUM Mach3 Controller Bundle
  

The NVUM system controls 4 axis and is compatible with Mach3 or DrufelCNC. The NVUM system has been used for years and has many online forums about it. The NVUM system uses external genuine TB6600 Stepper Drivers suitable for High Torque Stepper Motors.

This option is suitable for if you have technical knowledge.

• STB5100 Mach3 Controller Bundle
  

The STB5100 controller system can control up to 5 axis and is compatible with Mach3 or DrufelCNC. The STB5100 system uses the TB6600-T4 board which is suitable for our high torque stepper motors. This system does require some more work in wiring and setting up.

This system is complex and we do not recommend this system for a novice.

Spindle Bundle Options:ccccccccccccccccccccccccccccccccCCc

• Advantages of air-cooled engines are that they are lighter without the use of radiators, water pumps, thermostats, coolant, or hoses.

• Disadvantages are that they cannot warm up fast and cannot maintain a constant engine temperature. This will affect engine performance and emissions in climate changes like extreme cold or hot temperatures. A cold engine requires added fuel to run properly.

1.5KW / 2.2KW Water-Cooled

• Advantages of water-cooled engines are that they can warm up quickly and maintain the engine temperature better than the air-cooled design. This helps maintain engine performance and emissions.

• Disadvantages of a water-cooled engine is the added weight of the engine design along with added weight of the cooling system components like the radiator, water pump, coolant, and hoses.

Specs of 1.5 kW Air / Water Cooled Spindle:

Specs of 2.2 kW Water Cooled Spindle:

Please note:

------------------------------------------Part List------------------------------------

" V-Slot " and " C-Beam " are registered trademarks of OpenBuilds LLC as released under the Creative CommonsLicence "Attribution-ShareAlike"

All our components are designed to work and are fully compatible with the products produced by OpenBuilds.

Top Selling You May Like

---------------------------------Product Show---------------------------

Look! How The Lead CNC Full Kit is Cutting our Bulk Man 3D Logo!

_____________________________________________________________________________________________________________________________________________

Please note:  We have 2 different material of Cable Drag Chain Mounting Bracket, which is sent randomly.

-------------------------------------------------------Email: sunnyc@bulkman3d.com----------------------------------------

Payment:

We accept Alipay, West Union, TT. All major credit cards are accepted through secure payment processor ESCROW.

Payment must be made within 3 days of order.

If you can't checkout immediately after auction close, please wait for a few minutes and retry .

Shipment:

Please write MUST MATCH Shipping order addresses.

Item will be shipped within 1-3 business days in normal time.

If you have not received your shipment within 30 days from payment(Brazil 60-100days), please contact us. We will track the shipment and get back to you as soon as possible with a reply.

Customs Tax:

Import duties, taxes and charge are not included in the product price or shipping charge. Those charges are buyer's responsibility.

Feedback:

We will work with you to until you are satisfied. we sincerely hope that you can leave us a Positive Feedback& 5 Stars, for any reason you are not satisfied with your purchase, please contact us through (My Messages) or (Ask Seller Questions), Trade manager, before leaving neutral or negative feedback. We will do our best to resolve any problem and satisfy your needs.