Hobbypower 120A V3.0 Сенсорный безщеточный регулятор скорости ESC для 1/8 1/10 RC спортивного автомобиля Багги Рок-краулер.

Hobbypower 120A V3.0 Сенсорный безщеточный регулятор скорости ESC для 1/8 1/10 RC спортивного автомобиля Багги Рок-краулер.

Brand NamehobbypowerModel Number120A V3.0OriginMainland ChinaMaterialComposite MaterialUseVehicles & Remote Control ToysRecommend Age18+RC Parts & AccsSpeed ControllersFor Vehicle TypeCarsTool SuppliesBatteryTechnical parametersValue 2Four-wheel Drive AttributesMotorsUpgrade Parts/Accessories Lithium BatteryRemote Control Peripherals/DevicesESCMeasurement unitpiece/piecesEach pack13 410,87 ₽3 410,87 ₽Add to CartBuy now3 410,87 ₽loader

Description

Hobbypower Brand, 120A V3.0 firmware speed controller

Current : Continuous 120A , Burst 760A
BEC: 6V 5A or 7.4V 5A
Size(L*W*H): 43*36*33 mm
Weight: 95G
Connector: T style power plug & 4.0mm gold bullet motor plug
Function: forward, brake and reverse
Default running model: forward only with brake (if you want change the mode, you need a Multifunction LCD Program Box)
Motor Supported: Sensored and sensorless brushless motor


Suitable Motor: 
- With 2 Lipo or 4-6 NiMH
1/10 on-road: >=3.5T

1/10 off-road: >=5.5T 
- With 3 Lipo or 7-9 NiMH
1/10 on-road: >=5.5T
1/10 off-road: >=8.5T


Suitable Car: 
1/10,1/12 stock competition
1/10,1/8 rock crawler

Features
1,The fan is intelligent temperature control, and the power is turned on for a few seconds to visually detect to determine whether the fan is good or bad. The fan is powered by the BEC. The temperature control system is on the inside of the board and detects the temperature on the board. At 6V BEC, the temperature reaches 42 degrees and the fan starts to turn. After 48 degrees, the speed is basically the largest. At 7.4V BEC, the temperature reaches 38 degrees and the fan starts to turn. After 44 degrees, the speed is basically the largest. (There will be a 2 degree deviation).

2,BEC is the switch BEC of 5A output, the voltage is 6V and 7.4V optional.

As shown in the default red circle, the two small solder joints are disconnected and the BEC output is 6V. After connecting the two solder joints, the 7.4V BEC output is connected (Note the power must be turn off during soldering, and make sure the device such as the receiver and servo can be connected with 7.4V before solder).

3,Build-in 20pcs 47UF/25V chip capacitors, it can completely replace the external capacitor.

4,ESC is V3.0 firmware, can only be set with multi-function LCD programming card

5,This ESC is an enhanced version of Hobbywing Xerun 120A. It is very durable. If several temperature protections occur, the ESC will stop working, indicating that the maximum load of the ESC has been exceeded. Please reduce the configuration usage.

6,For other unspecified, please refer to the Hobbywing Xerun 120A manual.

Package includes:
1 x HP 120A V3.0 Brushless ESC
1 x Manual