DC12V 4CH 10A RF Wireless Remote Control Switch 433 MHZ 4 Button White Transmitter For LED Lamp Lights Motor DIY Function | Обустройство

DC12V 4CH 10A RF Wireless Remote Control Switch 433 MHZ 4 Button White Transmitter For LED Lamp Lights Motor DIY Function | Обустройство

Feature:

· Wireless control, easy to install

· Control Lights, Motors, Fans, electrically operated Doors/Locks/Windows/Blinds/Cars or Other Appliances with AC220V,AC85V-260V OR DC12V..

· You can turn on/off the receiver with transmitter (remote control) from any place within a reliable distance; the wireless RF signal can pass through walls, floors and doors.

· This switch can learn different coding remote controls (such as 2262,1527 ect.)

· One/several transmitters can control one/several receivers simultaneously.

· If you use two or more receivers in the same place, you can set them with different codes. If you use multi-button transmitter, you can control the controller with different buttons, it wont affect each other.

· Operating Frequency: 315MHz / 433MHz

· The wireless receiving controller, with high confidentiality, stable performance, low power consumption characteristic, jump line or dial the code switch coding.


About Receiver:
 

· Model No.: AK-RK04S-12-B

· Channel: 4 CH

Radio Frequency:315MHZ/433MHZ

Operating Voltage:DC12V

Operating Type:Jog /Momentary/Non-Latched(Press and hold->On,Release->Off)

Interlock /Latched(Press -> On; Press other button -> Off)

Self-lock/Toggle(Press->On,Press again->Off)

· Coding Type: learning code

· Maximum Working Current: 10A

· Output Mode: Without voltage output(also called Contact output)

· Step-down approach: resistance-capacitance

About Working way/ output Way:

· Output Working way for learning code switch-Jog, Self-Lock, interlock, changed by soldering or jump cap.

Momentary/ Jog--Press and hold -> On; Release -> Off.

Toggle/ Self-lock--Press -> On; Press again -> Off·

Latched/ Interlock--Press -> On; Press other button -> Off.


Transmitter:

· Buttons: 4 Buttons

· Working Voltage:DC6V

· Operating frequency :315/433MHz

· Remote Control Distance: 20-100m

· Encode: 2260/1527 code

  Battery : CR2016 3V 2PCS  IN CLUDED

About Learning and clearing Method:


Learning:

Press the learning key, it means the controller putting in the learning state when the indicator OFF, then please press any buttons of the remote control to transmit signals, the indicator will flash for 3 times,which means successfully studied.

Clearning:

Hold press learning button about 8 seconds,,indicator from OFF to ON,then press remote ,receiver did not work ,it means clearning code successful.