Беспроводной пульт управления AC 220V силовым светом переключатель радио-питания 10A 1 CH реле модуль приемник передатчик 315/433МГц on.

---

Brand NameMITIModel NumberR1QM-220mn-R2MaterialPlasticItem TypeSwitchesFeaturesMicro ReceiverCertificationCCCWarranty1 yearCurrent10ASwitch TypeRemote ControlRemote Distance20-200MMeasurement unitpiece/piecesEach pack1Encoding type:Learning CodeFrequency:315/433Mhz

Unavailable in 

Description

AC 220V Wireless Remote Control Switch Radio Power Light Switch 10A 1 CH Relay Receiver Module Transmitter 315/433Mhz

 

Item Description:

Specification:

1.Transmitter

Remote Control Distance: 50M/150ft (Please notice that is the ideal distance without any block and signal interfere , it would rise and fall about 10%-50% with the block and signal interference.) Encode: Fixed code, soldering 2260 2262 Frequency: 315/433Mhz  Power Supply:  battery  (NOT Include) 2.Receiver Channel: 1CH Power Supply (Operating Voltage): AC 220V Relay: 10A/250V AC, 10A/125V AC, 10A/30V DC, 10A/28V DC  Sensitivity: -105 dBm Operating Temperature: -10‘C ~ +60’C PCB Size:  31*36*17mm Output way : Jog, Self -lock is Adjustable

Code type : Learning code

 

  Control Mode: Toggle/Self-Lock:   Press->On; Press again->Off Press one button for one time is working/ON .press the same button again is stop/OFF .(1 channel switch(receiver) need 1 button remote control (transmitter).   Momentary/Jog:   Press and hold->On; Release->Off Keep pressing one button is working /ON. loosen your finger is stop/OFF .1 channel switch(receiver) need 1 button remote control (transmitter )   ​ Latched/Inter-Lock:   Press->On; Press other button->Off  Press one button is working/ON ,press another button is stop/OFF . ( 1 channel switch( receiver) need 2 buttons remote control (transmitter).        Learning and removing method: 1. There is a learning button on the control panel of touch switch, the button is used to learn and remove the code.       2. Press the learning button for one time, the indicator light turns on to off.  Press any key on the remote controller, the indicator flashes two times and off. It means you learn it successfully. 3. It can learn more than 12 PCS 2262 or 1527 chip with the different code wireless remote controller. 4. Delete remote control method: Keep pressing the learning button for about 8 seconds, the indicator light turns on to off, then the code you learned before will be deleted.  

 

Packing list:

2 x Receiver 1 x Transmitter (Battery not include)      

 

 

---