DM442 Leadshine Stepper driver For NEMA 17 to 23 motor work at 24V-40V out 4.2 A based on the DSP design | Обустройство дома

DM442 Leadshine Stepper driver For NEMA 17 to 23 motor work at 24V-40V out 4.2 A based on the DSP design | Обустройство дома

DM442: 2pcs

Leadshine Digital Stepper Motor Drive DM442 For NEMA 17 to NEMA 23 motor,work at 24V-40V ,out 4.2 A based on the DSP design

Features

• Anti-Resonance, provides optimum torque and nulls mid-range instability

• Motor self-test and parameter auto-setup technology, offers optimum responses with different motors

• Multi-Stepping allows a low resolution step input to produce a higher microstep output for smooth system performance

• Microstep resolutions programmable, from full-step to 102,400 steps/rev

• Supply voltage up to +40 VDC

• Output current programmable, from 0.5A to 4.2A

• Pulse input frequency up to 200KHz

• TTL compatible and optically isolated input

• Automatic idle-current reduction(Reduction rate can be software configured)

• Support PUL/DIR and CW/CCW modes

• Over-voltage, over-current, phase-error protection

Introduction :

The DM442 is a versatility fully digital stepping drive based on a DSP with advanced control algorithm. The DM442 is the next generation of digital stepping motor controls. It brings a unique level of system smoothness, providing optimum torque and nulls mid-range instability. Motor self-test and parameter auto-setup technology offers optimum responses with different motors and easy-to-use. The driven motors can run with much smaller noise, lower heating, smoother movement than most of the drives in the markets. Its unique features make the DM442 an ideal solution for applications that require low-speed smoothness. 

Compared to the DM432C, DM442 can output more current. What’s more, owing to its higher performance DSP, driven motors can achieve much higher speed (above 3000RPM) than that of the DM432C, offering servo-like performances. 

Electrical Specifications (Tj = 25oC/77oF)