Универсальный приемник для гаражных ворот на 12-24V DC с частотой 433,92 МГц для пультов PTX4, AT-4, S449, 4335E, 94335E Rolling и Fixed Code.

Универсальный приемник для гаражных ворот на 12-24V DC с частотой 433 92 МГц пультов PTX4 AT-4 S449 4335E 94335E Rolling и Fixed Code.

To Make Life Easier by Our Products!Product Description

1) Can learn Fixed and Rolling code 433,92Mhz remote controls separately and simultaneously !!!

2) 2 channel receiver provides you with an option to control and use 2 gate automations or alarm systems simultaneously

3) This receiver can be used in cases, when your original receiver's memory is full and can't accept any additional remote controls. By connecting this receiver to your system, you can increase the ammount of remotes up to 400. So 400 remote controls can be added to your existing system.

 4) This receiver can be used in case, if you need to add more additional remote controls. The original remote controls cost is quite expensive. By connecting this receiver to your system you will save a lot of money, especially if you require 10-20 or more additional remotes.

 5) If you have few different remote controls from different systems, you can replace them (substitute) with 1 4-channel remote!!! 
 It's very handy to use 1 remote instead of 3 or 4.

 6) It's very easy to connect it to your control board. All you need is to connect 4 wires between receiver and control panel.  If you will need any technical support - i'm always at your service!

1. Power supply: 12V/24V AC/DC

2. Frequency: 433.92Mhz

3. Rolling code

4. 2 channel

5. Maximum storage: 400 codes

PROGRAMMING:

1. Learning transmitter’s codes:

Press “learn 1” or “learn 2” for 1 second, the “learn_led” light, then, press the button which you choose on the transmitter till the “learn_led” flash and go out, the transmitter’s code has been stored.

•  Repeat the above steps for other transmitters.

2. Erasing transmitter’s codes:

Press “learn 1” or “learn2” and hold on to make the “learn_led light till go out, all codes of transmitters which had been stored are erased.

Return:

Returns are accepted .

In case of a refund all items must be returned undamaged, in a re-sellable condition.

For DOA (Defective On Arrival) items, which will be replaced or refunded, please inform us within 24 hours of arrival, please also keep all of the components and original packaging as further checking might be required.

Faulty items must be returned for repair or exchange.

Buyer is responsible for all shipping costs of returning an item for a refund or exchange .

Delivery:

All products are individually inspected before being dispatched, to ensure items are sent out in perfect condition.

Items will be shipped within 48 hours after payment is received / cleared (except weekends and holidays).

Feedback:

1. We are committed to your satisfaction. Your positive feedback and 5 stars rating will be highly appreciated.

2. If you are not satisfied by any means, please give us an opportunity to offer you a proper solution. Thanks!

Contact us:

1.If you have any question, Please contact us.All message will be answered within 24 hours from Monday to Saturday.
2. Please contact us before leaving any negative or neutral feedback or opening disputes, we will work with you to solve any problems.