*Текущая стоимость уже могла изменится. Что бы узнать актуальную цену и проверить наличие товара, нажмите "Добавить в корзину"







2 Pcs LED Bulb Load Resistor Turn Signal Flash Controller & 1 Pcs Repeater Relay 12V 30A 5 Pin 40A for Auto Car
2 pcs LED Bulb Load Resistor & 1 pcs Repeater Relay 12V 30A 5 Pin 40A
Brand new and high quality
5 pin relay and a single pole
Main contacts are valued at a maximum of 30 amperes to 12 V DC
Relay is switched with 9-15 volts DC and a about 150mA current consumption
color:Picture color
Resistance + Clamp:
Resistance to avoid cases: blinking too fast or not flicker.
Each has flashing LED requires a resistance.
Power: 50W 6 Ohm
Voltage: 12V DC
2 resistors, 2 pairs of son without caliper
Dimension: 5x2.2x1.5cm
Installation: connect the two sides of resistance to positive and negative terminals of the flashing power LED cable has respectively;
material: aluminum, plastic
relay has 5-pin:
Contact rating: 40A / 30A
Nominal coil voltage: 12V
Coil resistance: 80 ohm /-10%
Nominal current: 150mA
Maximum pick-up voltage: 7.8V
Fall minimum voltage: 1.2V
Contact material: Silver-cadmium oxide as standard
Operation time: 10ms maximum
Trip time: 10ms maximum
Temperature range:-40 degree to 85 degree
Suitable for car alarm fitter, audio Installer, electrician automotive and DIY use.
Package Contents:
2 x Resistance
4 x Clamp
1 x relay has 5-pin
1 x user manual in English
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.