20pcs B7000 502 Liquid Super Glue Mobile Phone Touch Screen DIY Repair Point Diamond Jewelry Metal Instant Strong Bond Leather | Канцтовары

20pcs B7000 502 Liquid Super Glue Mobile Phone Touch Screen DIY Repair Point Diamond Jewelry Metal Instant Strong Bond Leather | Канцтовары

    20pcs B7000 502 Liquid Super Glue Mobile Phone Touch Screen DIY  Repair Point Diamond Jewelry Metal Instant Strong Bond Leather   B7000 adhesive can be used to bond more materials to metal, glass, ceramic, stone, bamboo, cloth, leather, PE, PP, PVC, ABS, nylon, sponge, film, fabric, electronic components, plastics, rubber. , fiber, paper, and other materials have good adhesion properties. Technical data Appearance: transparent semi-fluid Solid content: 30% -35% Hardness after curing: 70-85A Surface dry time: 3 minutes or so Full cure time: 24-48 hours Save: Save at 10 to 28 degrees Instructions 1. Please read the product description carefully before use. 2. Before using in large area, please do a small area experiment first; 3. Please ensure that the surface of the adherend is clean and dry; 4, the use temperature should be between 18-32 degrees; 5. The product can be directly coated on the surface of the adherend as needed; 6. Wait for 1-2 minutes, align the two adherends with a slight pressure; 7. It can be put in a few hours, and the ideal bonding strength can be achieved after 48 hours. 8. When the product is not in use, cover the bottle to avoid curing after the glue contacts the air.    

Super Glue 502 is a self-leveling adhesive meets toys, flowers, jewelry. Special environmental bonding glue handicrafts and other industries, as compared to other adhesive 502 pungent odor but also tiny scent; belonging to the new one-component adhesive transparent solution, room temperature curing, easy to operate without re-packing, both openings may be used. With high elasticity, soft film, anti-vibration and waterproof. 502 adhesive more material can be pasted, metal, glass, ceramics, stone, bamboo wood, cloth, leather, PE, PP, PVC, ABS, film, textiles, electronic components, plastics, rubber, fiber, type, glass, rhinestones, and other materials have a very good pasting properties.

[Technical data]

Chemical metraial: Ethyl cyanoacrylate

Appearance: Low whitening low odor

Full cure time: 5 seconds

Storage: stored at -30 degrees to 75 degrees

[Usage]

1. Please read carefully before using the product description Introduction.

2, in front of a large area of use, please do a small area of the experiment.

3. Make sure that the sticky surface clean and dry.

4, the optimum operating temperature should be between 18-32 degrees.

5, the product can be used directly as needed openings evenly coated in sticky surface.

6, wait 3-6 minutes, the two are aligned adhesive sticky little pressure.

7, When the product is used, tighten the lid,avoid contact with air cured glue.

[Note]

1, may be irritating to the skin and eyes.

2. Use in a well-ventilated environment.

3. In case of contact with eyes, rinse with plenty of water.

4. Keep away from children's store, production operations, please stay away from fire.

5, the shelf life of a year, the safe use of the product pipe end date see.

Same function can be sticky metal, leather, plastics, glass, resins, ceramics, each glue advantageous for each product.

1 pc totals weight :3g