Electronic Lock Switch 12V 10A Wireless Remote Control Relay Module 433MHz Rf Transmitter Key Fob for Smart Home LED DIY | Обустройство

Electronic Lock Switch 12V 10A Wireless Remote Control Relay Module 433MHz Rf Transmitter Key Fob for Smart Home LED DIY | Обустройство

Wiring Diagram

This receiver can work with lamps,bulbs,lights,etc.The receiver itself needs DC 12 V power.And there are two different wirings depends on whether there is an external power too.Here is a picture:

It can control an electronic Door too.Please look at this picture:

Technical data of switch:
Power Voltage: DC 12 V
Working Voltage: 1-250 V
Size: 1.38*1.18 in(35*30 mm)
Max current: 10A
Quiescent Current: less than 5mA
Amount of storage remote controls: 25pcs
Working temperature: -30~+80 Celsius
Mode: Momentary / Toggle/ Latched/Mix Mode
Technical data of remote:  
Size: 1.38*1.18 in(35*30 mm)
Battery: 2pcs CR2016(Include)
Receiving Range: Up to 50 meters(theoretical distance)
Button: 1/2/3
Feature: Has keychain
Code: 1527 leanring
Material: PVC

Use in many places

Four rf modes

You can match the remote with the switch in 4 modes.

Momentary Mode:

1. Press and hold one button, relay will turn on;
2. Release button, this relay will turn off.

Toggle Mode:
1. Press button, relay will turn on;
2. Press same button again, this relay will turn off.

Latched mode:

1. Press button "A", relay will turn on;
2. Press button "B", this relay will turn off.(In this mode,you need at least 2buttons remote)
Delay mode:
1. Press and hold one button, relay will turn on;
2. Release the button, this relay will turn off after (5/10/15) seconds.
How to set up
A1.Press learning button 1/2 times
A2.Press remote button 1time,momentary/toggle mode succeed.
B1.Press learning button 3 times
B2.Press remote A button 1time,press remote B button 1time,latched modesucceed.
A1.Press learning button 4/5/6 times
A2.Press remote button 1time,5/10/15 delay mode succeed.
Clean data

Press learning button 8 times. The existing data will be deleted succeed.
Note:
1.If one remote has already set up with switch and you want to change modes,you need to clean data again
2.If you have many remotes to control same switch,you need to set up them one by one

Product Detail

1.Antenna : Extend receiving distance
2.Protective Housing : Protect components from damage during shipping and using
3.Indicator : Light when connected with power
4.Learning Button : Press learing button to set up mode
5.Blue Protection Terminal : High voltage protection
6.NO=Normal Open,NC=Normal Close,COM=Common port
7.+12 V : Positive 12V, -12 V : Negative 12V

*If you do not understand clearly. Please send us a message to let us know. We will do our best to service each of our customers. Enjoy your shopping!*

* We have our own factory.Please let us know if you have some OEM projects.We are willing to get a cooperation with you. *