Raspberry Pi Zero LCD Audio Player I2C I2S DAC Module Button Screen Carrier Board Display | Компьютеры и офис

Raspberry Pi Zero LCD Audio Player I2C I2S DAC Module Button Screen Carrier Board Display | Компьютеры и офис

Notes
Note that our installer, linked above, does all of the below for you, but if you're an intrepid hacker then you might need to know this stuff!

The DAC can be configured by adding dtoverlay=hifiberry-dacplus to the /boot/config.txt file.
The buttons are active low, and connected to pins BCM 5, 6, 16, and 20
The display uses SPI, and you'll need to enable SPI through the Raspberry Pi configuration menu.
Software compatible Pirate Audio software
(//learn.pimoroni.com/tutorial/sandyj/getting-started-with-pirate-audio)

 git clone //github.com/pimoroni/pirate-audio
 cd pirate-audio/mopidy
 sudo ./install.sh

Hardware
st7789 display - //github.com/u-geek/st7789-python
four buttons, active low connected to BCM 5, 6, 16, and 20 (A, B, X, Y respectively)
IR remote, IR receive GPIO use BCM4 and IR send GPIO use BCM17

Installation DAC
You'll need to add the following lines to /boot/config.txt to get audio up and running:

dtoverlay=hifiberry-dacplus

You can also disable onboard audio if you're not going to use it, this sometimes helps applications find the right audio device without extra prompting:

dtparam=audio=off

Installation Display
If you're planning to build your own application you'll find some inspiration in examples.

But first you'll need some dependencies:

sudo apt-get update

sudo apt-get install python-rpi.gpio python-spidev python-pip python-pil python-numpy

And then you'll need the st7789 library:

sudo pip install st7789

For more display examples see: //github.com/u-geek/st7789-python/tree/master/examples

Photo

1. RPI ZERO DAC Aduio x1