Титановый фильтрующий элемент металлического порошка, спекшийся в стержень с интерфейсом флип-карты.

Титановый фильтрующий элемент металлического порошка спекшийся в стержень с интерфейсом флип-карты.

Description

type1: diameter: Φ30mm, length: 5 inches (125mm), interface form: M20 interface, filtration accuracy: 0.45 microns

type2: diameter: Φ50mm, length: 5 inches (125mm), interface form: M20 interface, filtration accuracy: 0.45 microns

1. The main performance of titanium rod filter element

Titanium rod filter element (including tube type and plate type) is made of industrial high-purity titanium powder (99.7%) as raw material, after sieving, cold isostatic pressing, high temperature and high vacuum sintering. Therefore, the titanium rod filter element has unique excellent performance due to its high-tech material composition and special molding process:

1. Uniform structure, narrow pore size distribution and high separation efficiency.

2. High porosity, low filtration resistance and high penetration efficiency.

3. High temperature resistance, generally can be used normally below 280 degrees.

4. Good chemical stability, acid and alkali corrosion resistance, and oxidation resistance.

5. No particles fall off, no secondary pollution to the original liquid, and it meets the requirements of food hygiene and pharmaceutical GMP.

6. Good mechanical performance, press filter and suction filter, simple operation.

7. Low pressure difference, small floor space and large flow.

8. Strong anti-microbial ability, does not interact with microorganisms.

9. The molding process is good, and the overall length without welding can reach 1000 mm.

10. It can be regenerated online, is easy to clean, and has a long service life (generally several times the membrane filter element)

2. Main parameters of titanium rod filter element

Filtration accuracy: 0.22μm-100μm

Porosity : 28-50%

Air permeability : 0.02-20M3cm/m2h.mmH2O

Compressive strength: 0.5-1.5Mpa

Temperature resistance : 280℃ (wet state)

Maximum working pressure difference: 0.6Mpa

Three, specifications

Diameter: Φ30mm Φ50mm Φ60mm

Length: 5 inches (125mm) 10 inches (250mm) 12 inches (300mm) 20 inches (500mm) 30 inches (750mm) 40 inches (1000mm)

Interface form: M20 interface M30 interface 222 interface 226 interface

Filtration accuracy: 0.45 micron 1 micron 3 micron 5 micron 10 micron 20 micron 30 micron 50 micron 80 micron 100 micron

Fourth, the application field of titanium rod filter element

Titanium rod filter element with its unique performance can be widely used in the pharmaceutical industry, water treatment industry, food industry, biological engineering, chemical industry, petrochemical industry, metallurgical industry and gas purification fields. It is a new material with broad development prospects. Typical uses include:

1. In the pharmaceutical industry, decarburization filtration in the concentrated formulation of large infusions, small injections, eye drops, and oral liquids, and security filtration before terminal filtration in the thin formulations.

2. Impurity removal filtration, decarbonization filtration and fine filtration of materials in the production process of APIs.

3. Ultrafiltration, RO, EDI system security filtration in the water treatment industry, filtration after ozone sterilization and ozone aeration.

4. Clarification and filtration of beverages, liquor, beer, vegetable oil, mineral water, soy sauce and vinegar in food and beverages.

5. In the chemical industry, decarbonization filtration and precision filtration of liquid products, liquid raw materials, pharmaceutical intermediates, filtration and recovery of ultra-fine refined bodies and catalysts, precision filtration after resin adsorption, and system heat transfer oil and material removal filtration, catalysis Air purification and so on.

6. Oil field return water filtration, security filtration before reverse osmosis in the field of seawater desalination.

7. High-temperature decarbonization and de-white clay filtration in the dye industry.

8. Vapor, compressed air and catalyst filtration for gas purification.